The Innovage Jumbo Universal Remote is a device that can operate multiple electronics systems with one control. The Jumbo Universal Remote supports cable, television, VCR, DVD and satellite systems. The remote control takes only a few minutes to set up and has the ability to accept input codes for the different devices or search for the devices’ codes. To enter the code into the remote, turn on the device you want to add. Point the remote control at the device and hold the “Code Search” button until the LED light is solid red. Press the button for the device you want to set, such as “TV” or “DVD.” The light will blink once and then stay solid red. Use the number buttons on the remote to enter the first code associated with your device. Once the code is inserted, the LED light will turn off. Point the remote at the device and press the “On/Off” button. If the device turns off, the code is correct. If the device does not turn off, repeat the preceding steps using the next code on the list. To use the code search, turn on the device you want to set. Point the remote at the device and hold the “Code Search” button until the LED is solid red. Press the corresponding button for the device you wish to set, such as “TV” or “DVD.” With the remote pointed at the device, repeatedly press the “On/Off” button. Continue to do this until the device powers off. When it shuts off, press the “Enter” button to set the remote control. Use the “On/Off” button and see if the device turns on again. If it does, the setting is complete. If it does not, attempt the code search again and be sure to press the “Enter” button quickly when the device turns off. Writer Bio
